1.Electricity Saving
Compare with steam hammer,the biggest advantage of Electro Hydraulic Forging Hammer is Electric Saving,it can save about 80% energy.
The working principle of hydraulic forging hammer is compressde gas pressure drive the hammer rod down,hydraulic oil drive the hammer rod up,so when do hitting,just the compressed gas and on the gravity of hammer rod and tup,it goes down,the motor will not work. When lift the hammer rod,the motor will not work. When lift the hammer rod,the motor run,so it just consumes 50% energy of the motor power,also we don't need any boiler and compressor!
2.Time Saving
Start quickly and saving energy greatly.On steam forging hammer or air commpressor forging hammer,you should burn the boiler or run the air compressor long time,if you want to start the hammer and if some problems happen on the hammer or on the dies,the steam or compressed air you got will be wasted, on electro hydraulic forging hammer,you can start the hammer within 2 minutes. If any problems happen on hammer or dies, you can turn off the motors, No waste.
3.Money Saving
Compare belt drop hammer and air compressor hammer with the same capacity hydraulic hammer,the power consumption of former two is at least 4 times than that of hydraulic hammer.
For one ton hydraulic hammer with the blow frequency in 40 blows per minute or 2400 blows per hour,it is required 55kw motor and energy usage is 90%, so the power consumption is 61.11kw/h.
The same capacity and hit frequency air compressor hammer consumes 1440m3/h. Suppose 6.5kw motor can compress 1m3 air from 0 to 7 bar,to assure the same motor frequency, the compressor capacity will be 156kw,the power consuption is 173kw/h.
Compare with hydraulic hammer,the consumption ratio is 1:3,with old type steamed hammer, the ratio is much larger, especially let alone the waste of air during the transmission in pipelineedisionzhu@gmail.com
I really liked your Information. Keep up the good work. Origin Plans
回复删除You can buy hydraulic hammer parts from online stores. One such store is Meritautomotive. They offer a wide range of quality parts for hydraulic hammers such as front head cylinders, bushings, pistons, tie rods, through bolts, rod pins, accumulators, seal kits, diaphragms, shock absorbers, and much more. They have a huge inventory of quality parts at your disposal and can ship directly to your door in most locations in the continental AU, Asia, EU, Africa, Americas, USA and Canada. They also offer free regular shipping on most orders over $9999.
回复删除Merit rock breaker hydraulic hammer provides spare parts suitable for Epiroc, Rammer, Furukawa, DNB, Atlas Copco, MTB, Krupp, MSB, Allied, Montabert, Daemo, Hanwoo, CP, Kwanglim, Soosan, Topa and others.
hydraulic hammer parts