16 ton electro hydraulic close die forging hammer

The advantage of hydraulic hammer are as following:
1.Electricity Saving
Compare with steam hammer,the biggest advantage of Electro Hydraulic Forging Hammer is Electric Saving,it can save about 80% energy.

The working principle of hydraulic forging hammer is compressde gas pressure drive the hammer rod down,hydraulic oil drive the hammer rod up,so when do hitting,just the compressed gas and on the gravity of hammer rod and tup,it goes down,the motor will not work. When lift the hammer rod,the motor will not work. When lift the hammer rod,the motor run,so it just consumes 50% energy of the motor power,also we don't need any boiler and compressor!

2.Time Saving

Start quickly and saving energy greatly.On steam forging hammer or air commpressor forging hammer,you should burn the boiler or run the air compressor long time,if you want to start the hammer and if some problems happen on the hammer or on the dies,the steam or compressed air you got will be wasted, on electro hydraulic forging hammer,you can start the hammer within 2 minutes. If any problems happen on hammer or dies, you can turn off the motors, No waste.

3.Money Saving

Compare belt drop hammer and air compressor hammer with the same capacity hydraulic hammer,the power consumption of former two is at least 4 times than that of hydraulic hammer.

For one ton hydraulic hammer with the blow frequency in 40 blows per minute or 2400 blows per hour,it is required 55kw motor and energy usage is 90%, so the power consumption is 61.11kw/h.

The same capacity and hit frequency air compressor hammer consumes 1440m3/h. Suppose 6.5kw motor can compress 1m3 air from 0 to 7 bar,to assure the same motor frequency, the compressor capacity will be 156kw,the power consuption is 173kw/h.

Compare with hydraulic hammer,the consumption ratio is 1:3,with old type steamed hammer, the ratio is much larger, especially let alone the waste of air during the transmission in pipelineedisionzhu@gmail.com

3 ton electro hydraulic close die forging hammer working in india

I think this hammer is very beautiful,because it worked very well .Till now,we have exported so many electro hydraulic close die forging hammer like this to many countries,like Russia,Burma,India,Romania etc.

5 ton electro hydraulic close die forging hammer working in india

Anyang Forging Press Machinery Industry Co.LTD is a special manufacturer of producing electro hydraulic close die forging hammer.Till now ,we have exported the electro hydraulic close die forging hammer to Russia,Romania,Burma,and India ,especially in india ,we have exported so many electro hydraulic close die forging hammer to every city of india,and we got good reputation frome these companies.